Ford Focus Mk2/3, Mondeo Mk3/4 & Volvo Hubcentric Wheel Spacers 5 x 108, 20mm thick, 63.4mm Centre

This is a pair of hubcentric type wheel spacers, made from anodized aluminium and will space the wheel out 20mm on each side.

Fitting wheel spacers not only makes the car look better and more aggressive but it will also improve the handling.

Will fit all models of the Ford Focus Mk2 or Mk3 including the ST and the RS.

Will fit all models of the Ford Mondeos made after 2000 including the ST220.

Will fit lots of models of Volvo, check your hub specs match the below.

A good rule of thumb with Volvo’s is if they were made after 2010 then these should fit but it is best to check.

Part Specifications;

PCD : 5 x 108
Thickness : 20mm
Material : Aluminium
Finish : Black Anodized
Thread : M12 x 1.5
Spigot : 63.4mm

The studs in these spacer are longer than the OE studs, if you have closed lug nuts please check they are deep enough before fitting. If the nut bottoms out before it seats against the wheel you could end up with catastrophic failure of the product. For those with open lug nuts the above does not apply.