Volvo (many models) Hubcentric Wheel Spacers 5×108, 15mm thick

This is a pair of forged hubcentric type wheel spacers, made from anodized aluminium and will space the wheel out 20mm on each side.

These will fit lots of models of Volvo, check your hub specs match the below.

A good rule of thumb with Volvo’s is if they were made after 2010 then these should fit but it is best to check.

Part specifications

PCD : 5 x 108
Thickness : 15mm
Material : Aluminium
Finish : Black Anodized
Thread : M12 x 1.5
Spigot : 63.4mm

The studs in these spacer are longer than the OE studs, if you have closed lug nuts please check they are deep enough before fitting. If the nut bottoms out before it seats against the wheel you could end up with catastrophic failure of the product. For those with open lug nuts the above does not apply.